This is the most recent version of the file.

Neo-pixels Code/PIC16F1459-config.c

@@ -0,0 +1,46 @@
+/*==============================================================================
+ File: PIC16F1459-config.c
+ Date: March 1, 2022
+  
+ UBMP4.1 (PIC16F1459) configuration bit settings
+
+ Processor configuration bits determine processor operating characteristics as
+ well as processor-specific features. Refer to the processor datasheet for
+ details on specific configuration bit settings.
+
+ The settings below were generated by the Configuration Bits tool in MPLAB X,
+ accessed under: Window menu -> Target Memory Views -> Configuration Bits
+==============================================================================*/
+
+// TODO - Verify or modify configuration bits using the Configuration Bits tool.
+
+// PIC16F1459 Configuration Bit settings generated for UBMP4 by MPLABX.
+// These settings must exactly match those in the bootloader program if a 
+// bootloader will be used.
+
+// CONFIG1
+#pragma config FOSC = INTOSC    // Oscillator Selection Bits (INTOSC oscillator: I/O function on CLKIN pin)
+#pragma config WDTE = SWDTEN    // Watchdog Timer Enable (WDT controlled by the SWDTEN bit in the WDTCON register)
+#pragma config PWRTE = ON       // Power-up Timer Enable (PWRT enabled)
+#pragma config MCLRE = OFF      // MCLR Pin Function Select (MCLR/VPP pin function is digital input)
+#pragma config CP = OFF         // Flash Program Memory Code Protection (Program memory code protection is disabled)
+#pragma config BOREN = SBODEN   // Brown-out Reset Enable (Brown-out Reset controlled by the SBOREN bit in the BORCON register)
+#pragma config CLKOUTEN = OFF   // Clock Out Enable (CLKOUT function is disabled. I/O or oscillator function on the CLKOUT pin)
+#pragma config IESO = OFF       // Internal/External Switchover Mode (Internal/External Switchover Mode is disabled)
+#pragma config FCMEN = OFF      // Fail-Safe Clock Monitor Enable (Fail-Safe Clock Monitor is disabled)
+
+// CONFIG2
+#pragma config WRT = OFF        // Flash Memory Self-Write Protection (Write protection off)
+#pragma config CPUDIV = NOCLKDIV// CPU System Clock Selection Bit (NO CPU system divide)
+#pragma config USBLSCLK = 48MHz // USB Low SPeed Clock Selection bit (System clock expects 48 MHz, FS/LS USB CLKENs divide-by is set to 8.)
+#pragma config PLLMULT = 3x     // PLL Multipler Selection Bit (3x Output Frequency Selected)
+#pragma config PLLEN = ENABLED  // PLL Enable Bit (3x or 4x PLL Enabled)
+#pragma config STVREN = ON      // Stack Overflow/Underflow Reset Enable (Stack Overflow or Underflow will cause a Reset)
+#pragma config BORV = HI        // Brown-out Reset Voltage Selection (Brown-out Reset Voltage (Vbor), high trip point selected.)
+#pragma config LPBOR = OFF      // Low-Power Brown Out Reset (Low-Power BOR is disabled)
+#pragma config LVP = OFF        // Low-Voltage Programming Enable (High-voltage on MCLR/VPP must be used for programming)
+
+// #pragma config statements should precede project file includes.
+// Use project enums instead of #define for ON and OFF.
+
+#include <xc.h>